Item # 10000RS - Basic Spread-Spectrum Rcvr 32 Cue

The 10000RS Receiver is a FCC Certified Two Way Firing, long range frequency-hopping spread spectrum two way radio transceiver designed to be used for remote control applications where high reliability and longe range is critical. When used with the 10000TS Transmitter, a range of two miles (line of sight operation) is typical, provided there are no intervening conductive objects such as automobiles, chainlink fences, etc. Range increases as the receiver is elevated above earth or other conductive objects (such as aluminum bleachers). Range will usually exceed two miles when transmitting over water.

Communication occurs on multiple synthesized carrier frequencies in the 900 MHz band. Since synthesis is digitally controlled from a quartz crystal, no alignment or tuning procedures are ever required to maintain optimum performance.

Commands are transmitted to the receivers in digitally encoded data packets. These packets contain extensive error detection coding and are transmitted reduntantly multiple times on multiple frequencies to enhance successful communication even in the presence of severe narrow band interference. All communication is two way for enhanced reliability. After successful command transmission and execution, the receiver transmits a confirmation signal back to the transmitter. The receiver also continuously transmits status information, such as armed status and received signal strength, which is displayed on the transmitter panel. This enables the operator to have confidence that receiver outputs will fire successfully when commanded.

Receivers are programmed in advance from the transmitter panel to sequential cue ranges (so that each receiver fires a selected portion of the total cue range), or to identical cue ranges (so that multiple receivers fire identical cues for fronts and similar effects,) or to any combination thereof. Fire sequences of unlimited length in automatic (machine-gun) mode at panel selectable rates of 1 to 20 shots per second.

Power is supplied by self-contained rechargeable sealed lead-acid battery using Absorbent Glass Mat (AGM) technology for superior current capability and energy density. Available with 12Volt, 5Amp outputs or 24Volt, 5Amp outputs.

To order a battery charger, please click on accessories.